Clear Films

Folex Digiprint-IG/PVL

Specially coated polyester film for Electro Ink with a Clear Transparent surface. The film is heat stabilized for good flatness properties and the coating offers excellent ink transfer & bonding for consistent image performance. Paper backing along the long side for smooth feedability.

Cut sheets

Art. NumberWidth (mm)Length (mm)Nominal thickness (mm)Packing quantity

Technical data


  • Superb ink adhesion and image transfer
  • Easy storage
  • Excellent dimensional stability
  • Suitable for short and long runs
  • Officially approved by HP Indigo test centre
  • Tear resistant
  • Consistent performance
  • Dedicated coating for Indigo Electro Ink
  • No limited shelf life
  • Splash resistant


  • Clear glossy
  • Paper backed long side


Coating PrintsideHP Indigo Electro Ink
Width (inch)20.87
Width (mm)530
PrintsideFilm side
Length (inch)29.53
Length (mm)750
Nominal thickness (mil)5.2
Nominal thickness (mm)0.130
BacksidePaperbacked glued long side
Total Thickness (mil)8
Total Thickness (mm)0.200
Base MaterialPolyester film
Packing quantity 200


  • Suitable for Digital Presses from HP Indigo
  • Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).


  • A preconditioning period of 24 hours within the printing environment is recommended.
  • Please carefully follow the handling instructions supplied with this product as well as the press manufacturers manual.
  • No special handling required.
  • Avoid fingerprints on printing side.


  • Shelf life: 1 year after delivery
  • Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Downloads (PDF)