Label Laser PET Gold P
Permanent acrylic self-adhesive polyester film with a paper release liner. Ideal for stickers, signs and decals. It is tear resistant and can be used in internal or external conditions. The imaged film has outstanding toner bonding and water resistance.
|Art. Number||Width (mm)||Thickness||Length (m)|
|38048.050.09125||1200||0.070 mm||bulk roll|
- High brillance of colours
- Good scratch resistance
- Tear resistant
- Universal use
- Weather proof prints
- self-adhesive with paper backing
|Release liner||siliconized paper|
|Thickness of carrier material ||0.070 mm|
|Adhesion strength||~ 3.5 - 5.0 N / 25 mm (A.F.E.R.A.), after 24 h ~ 10 N / 25 mm (A.F.E.R.A.)|
|Type of adhesive||dispersion|
|Length (m)||bulk roll|
|Roll width / Roll usable width ||Please contact Folex if you need other roll widths and roll lengths. We can convert the rolls according to your wishes.|
|Temperature range||glued +5°C up to +80°C|
|Base Material||PET film|
|Total thickness||0.158 mm|
- Suitable for most toner-based label roll printers.
Before printing, the film has to be conditioned in the print room to equalize the temperature of the material on the room temperature. Please note dependant on climatic conditions the film may exhibit a little more static at the output tray which may require monitoring.
All even, smooth surfaces which are dry and free of dirt, grease, silicon etc. can be adhered. If applied onto curved surfaces please be aware that label lift off can occur especially if the radius is tight. It is up to the user to test for there own suitability/application, due to the wide variety of surfaces, applications & desired results. Gluing on low-energy surfaces such as LDPE, PE or PP will be not recommended. Adhesion temperature at least 15° C.
The durability of the glued label is heavily influenced by the prevailing ambient conditions, the place of use and the bases!
- Shelf life: 1 year after delivery
- In its original packing at 20-25°C, 45-55% humidity.