Ink Jet
Signolit SIVK
Clear vinyl calandered, monomeric removable acrylic adhesive film. Ideal for stickers, signs, decals and mock-ups. It sticks to most clean surfaces.
Printing Systems

Cut sheets
Technical data
Characteristic
- High brillance of colours
- Adhesive light
- Universal use
Finish
- Clear glossy
- self-adhesive with paper backing
Specifications
Release liner | siliconized paper ~ 0.145 mm |
Coating Printside | Power-Gloss®, clear glossy |
Width (mm) | 210 |
Thickness base material with toner coating | 0.110 mm |
Format | DIN A4 |
Adhesion strength | >/= 3.5 N, after 24 h >/= 10 N |
Type of adhesive | polyacrylate dispersion, semipermanent |
Length (mm) | 297 |
Base Material | calendered monomeric plasticized PVC, 0.100 mm |
Total thickness | 0.260 mm |
Packing quantity | 100 sheets |
Compatibility
- For use on most Small Format Ink Jet Printers such as: HP, Canon, Epson, Apple, Digital, Kodak, Lexmark, Olivetti, Tektronix, Xerox, etc.
Handling
- Laminating: The printed surface must be protected with foils for cold lamination if it is subject to humidity, sweaty hands, abrasion or any other influences. For a short term outdoor use, SIVK must always be protected with a 5mm overlapping lamination.
- Gluing: SIVK will stick to any solid, smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally. During gluing the temperature must reach at least 15°C. You can remove SIVK by heating the film’s surface with a hot air gun. Then pull it off carefully.
Storage
- Shelf life: 1 year after delivery
- Store in a cool and dry place
Downloads (PDF)