Solventbased, UV-curable and Latex Inks

Reprojet ES CL

Specially coated, highly clear transparent polyester film for the production of full tone separations that can then be contact exposed to silk screens. The film offers high ink absorption capacity with a very fast drying time. Dependant on RIP settings or when using print mode "double strike print", ink coverage is excellent and high UV densities can be attained by printing with the K-ink mode. Due to its high transparency it is also ideal for overlays, templates, glass graphics etc. The film meets the highest demands with regard to image registration accuracy and dimensional stability.

Printing Systems


Art. NumberWidth (mm)Length (m)Total Thickness (mm)

Technical data


  • Print side: light matt structured coating for good roll transport in the printer
  • Suitable for eco solvent ink
  • Good ink adhesion
  • High resolution
  • High visual contrast
  • Fast ink drying (if necessary activate heating system in the printer).
  • Improved water resistance


  • Clear glossy


Coating PrintsideInk Jet Eco Solvent & Solvent
Width (inch)24
Width (mm)610
PrintsideSlightly matted, rougher side
Length (ft)98.43
Length (m)30
Nominal thickness (mil)5
Nominal thickness (mm)0.125
Total Thickness (mil)6.2
Total Thickness (mm)0.155
Base MaterialPolyester film
Packing quantity 1


  • Useable on most large format Ink Jet printers using solvent ink systems.
  • Not recommended for printing with oil, water based or latex inks.


  • Heating system in printer possible up to approx. 48°C. Higher temperature may cause film deformation.
  • Between 15-30°C and 30-70% r.h.
  • A preconditioning period of 24 hours within the printing environment is recommended.
  • Ink Load: approx. 220 - 280 % (may vary according to ink system and RIP calibration)
  • Lamination: cold or hot laminates (low-temp) possible, pre-tests are recommended.
  • Avoid fingerprints on printing side.


  • Shelf life: 1 year after delivery
  • Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Downloads (PDF)